Send Inquiry Place Order

Product specification

A, oil seal rotary performance testing machine features and uses: Suitable for all kinds of rotary oil seal sealing performance test and research work, oil seal is installed on the test machine, the spindle rotates at a certain speed, after a certain time of operation, observe whether the oil seal leakage, each can test 2 oil seals, test shaft can be positive, reverse. This machine has reasonable structure, novel design, good starting performance, large starting torque, wide speed range, small speed change rate, low noise, easy to operate. In line with GB/T 14273 "rotary shaft lip sealing ring performance test method" and other standard requirements.

Product introduction

Two, oil seal rotary performance testing machine technical parameters:
1, spindle speed: maximum 6000r/min (can also be determined according to user requirements)
2, spindle run-out error: less than ±0.03mm
3, axis bias adjustment: 0mm- 5mm
4, can test oil seal shaft hole range: ф 7mm- ф 200mm
5, temperature control range: normal temperature --120℃
6. Control mode: MZ-4005A six-speed tower wheel change. Mz-4005b frequency conversion speed regulation, pneumatic pressure, automatic test period control. Mz-4005b frequency conversion speed regulation, pneumatic pressure, linear guide rail, PLC control
7, motor power: 2.2KW ×2
8, power source: AC380V three-phase four-wire system (must have zero line) 50Hz
9, size: 1300mm×1000mm×1500mm
10, weight: 460kg